Latest in the forum:Plast Eurasia 2026'ya gidiyor musunuz? Fuarda neye bakacaksınız?Join the forum →
News World

Husky presents the HyCAP Pro beverage closure system at its Shanghai open house

Husky Technologies demonstrated the new HyCAP Pro closure molding system live at a four-day open house at its Shanghai facility. The company reports up to 45 percent higher productivity than the existing HyCAP in like-for-like applications.

Editor · November 5, 2026 · 1 min read

Representative image · Fructibus · CC0 · Wikimedia Commons · cropped

Canadian mold, hot runner and injection system maker Husky Technologies presented its new HyCAP Pro system at the Husky Connect Shanghai open house held in Shanghai from 13 to 16 October. According to the report, the system was shown in live production throughout the event.

What was announced about the system

HyCAP Pro is a new version of the company's HyCAP platform for beverage closure production. Husky's stated figures:

  • Up to 45 percent higher productivity than the traditional HyCAP system in like-for-like applications, while maintaining precision and repeatability.
  • Throughput of about 573 pounds (≈ 260 kg) of HDPE per hour, designed for the latest generation of HDPE closure materials.
  • Smart start/stop, Mold ID, energy monitoring, extended service intervals and a predictive monitoring system.

The report does not give the number of cavities, the cycle time or the clamp force.

The Shanghai facility

The Shanghai site was established in 2004 as a manufacturing centre and today serves as the company's regional headquarters. Husky also used the event to present a capacity expansion at the site; the company said its investments in manufacturing, engineering and service would provide faster support in the region.

What it means for molders

Closure production is one of the fastest, highest-cavitation applications in injection molding. Productivity gains here usually come from cutting a few tenths of a second from the cycle and from fewer stoppages. Features such as Mold ID and predictive monitoring aim to reduce unplanned downtime on high-volume lines. To look for cycle-time savings on your own line, see the cycle time reduction checklist. For the mold platform Husky announced in September, see the HyCAP 4.0 news item.

Is something missing or wrong in this article? ; verified errors are corrected.

Other news

View all →