Woojin Plaimm's AI-supported injection molding system PLAIMM-X monitors flash and sets clamping force itself
PLAIMM-X, introduced by Woojin Plaimm, combines flash tracking, automatic setting of the minimum clamping force, part weight control and energy monitoring on one platform. Temperature control units, chillers and dryers can be connected to the same system.

According to Plastik & Ambalaj magazine, injection molding machine maker Woojin Plaimm has introduced PLAIMM-X, an AI-supported smart injection molding solution. The system processes injection data in real time and combines several functions on one platform:
- Flash Monitoring: Detects flash in real time by analyzing tie-bar position changes on large two-platen machines and tie-bar elongation on small and medium toggle machines.
- Anti Flash: Automatically sets the minimum clamping force needed to prevent flash. According to the company, this reduces the load on the mold and can extend mold life.
- Weight Control: Automatically compensates for differences in part weight.
- Energy Monitoring: Analyzes the energy used for injection, clamping, part removal and cooling separately and tracks energy cost per part.
- Edge Controller: Connects temperature control units, chillers and dryers on one platform; the Smart Sequencer lets users set the run order of the equipment.
The company says the system was developed for quality stability, productivity, energy savings and wider use of recycled raw material. Richard, control team leader at Woojin Plaimm Austria GmbH, said they will keep developing data-driven smart technologies.
What does it mean for injection molders?
Excessive clamping force can crush vents and cause burn marks and short shots, and loads the mold and tie bars unnecessarily; too little force means flash. Systems like PLAIMM-X find this balance by measuring shot by shot. If your machine has no such system, the starting point is the theoretical force calculated from the part's projected area: clamping force calculator. For causes of flash other than clamping force, see causes of flash.
Is something missing or wrong in this article? ; verified errors are corrected.

